Dual 31-band, 1/3-octave Constant Q frequency bands

Switchable boost/cut ranges of ±6 or ±12 dB

Front panel bypass switch

±12 dB input gain range

4-segment LED ladders for monitoring output levels

XLR and TRS Inpts and Outputs

Frequency Response of <10Hz to >50kHz

Dynamic range of greater than 108dB

Input Connectors – 1/4″ TRS, female XLR (pin 2 hot)

Input Type – Electronically balanced/unbalanced, RF filtered

Input Impedance – Balanced 40k ohm, unbalanced 20k ohm

Max Input – >+21dBu balanced or unbalanced

CMRR – >40dB, typically >55dB at 1kHz

Output Connectors – 1/4″ TRS, male XLR (pin 2 hot)

Output Type – Impedance-balanced/unbalanced, RF filtered

Output Impedance – Balanced 100 ohm, unbalanced 50 ohm

Max Output – >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm)

Bandwidth – 20Hz to 20kHz, +0.5/-1dB

Frequency Response – <10Hz to >50kHz, +0.5/-3dB

Dynamic Range – Typically >112dB

Signal to Noise Ratio – Typically >95dB

THD+Noise – <0.003%

Interchannel Crosstalk – <-90dB, 20Hz to 20kHz

Bypass Switch – Bypasses the graphic equalizer section in the signal path

Low cut Switch – Activates the 50Hz 12dB/octave high-pass filter

Range Switch – Selects either +/- 6dB or +/-12dB slider boost/cut range